Then the cathode battery power supply positive, negative supply when the battery negative.
Charging the beginning of competition in two phases: first with the beginning of the charge current to charge the air bubbles electrolyte output voltage single cell to rise to 2.3 ~ 2 4 V up. Then the current drops to 1 / 2, the beginning of the load current to continue to care for the air bubbles out of the electrolyte intense sampling and continuous blood remain stable until 3am. inspiron 1525 battery , Normal charging time is about 45 ~ 65h.
Loading process must always measure the temperature of the electrolyte of electricity by half, to stop the loading or cooling method, the temperature was controlled at 35 ~ 40 ℃, the initial pricing is completed, if the proportion of irregularities in electrolyte, the demand for distilled water or the proportion of 1.4 Electrolysis solution to fit. Adjust the load after 2 hours, until the date that the proportion of compliance.
Charging new battery for the first time often reach capacity and discharge cycles should be performed. When the discharge rate with discharge 20hh (ie with a nominal capacity of 1 / 20 of the discharge current of a single cell voltage of 1.75V up to date), then add the load current sufficient after a charge and discharge cycles if the capacity is still below the nominal capacity of 90% and is expected to be another cycle of charging and discharging. Vostro 2510 battery